HTPHow to PackageProduction answers by Lancing UK
Labels and coding

How do I check material and surface compatibility for date codes?

Practical guidance for date codes: check materials, seals, adhesives, films, closures and product-contact parts.

Answer format: direct explanation, ordered checks and relevant solution routes. . Application-specific engineering review is still required.

Direct answer

For date codes, confirm compatibility using the complete product, pack and normal storage conditions. Reliable identification needs a controlled pack surface, correct label or ink, stable web or print path, accurate triggering and verified finished data. Start by obtain current technical data from the product and packaging suppliers and record position tolerance, adhesion, print readability, scan rate and reject accuracy. Make one controlled change at a time so the original cause is not hidden by several new settings.

Production environment relevant to labels and coding
Work safely: Isolate machinery before inspection or clearing. Follow the machine manual, site procedures and competent-person requirements.

What usually causes this?

  • seals, hoses, liners, adhesives or films reacting with the product
  • A change in pack surface and presentation or label, liner, adhesive or ink.
  • temperature, solvent, oil, moisture or pressure changing material performance
  • The equipment or handling method not being set for best-before, use-by or production dates printed onto packs.
  • a packaging component being dimensionally compatible but chemically unsuitable

Checks to make in order

  1. Obtain current technical data from the product and packaging suppliers
  2. Record position tolerance, adhesion, print readability, scan rate and reject accuracy using a representative sample.
  3. List every material that contacts the product or pack
  4. Check sensor and trigger position, web tension or print-head distance and wipe-down, rotation and code verification.
  5. Run filled-pack storage and handling trials
  6. Check the effect of cleaning chemicals and operating temperature
  7. Agree acceptance evidence in writing

How to decide the next step

Date codes involves best-before, use-by or production dates printed onto packs. Do not approve a machine or material solely because a similar product worked previously; test the actual formulation and pack.

If adjustment and maintenance cannot hold the required result across the complete product and pack range, compare the machinery route against a written acceptance test. The important comparison is sustained good output—not only maximum cycle speed.

What to include in your production brief

Supplying the information below makes it much easier to distinguish a setup problem from a machinery or packaging limitation:

  • Pack samples
  • Label reel or print substrate
  • Label size, gap and reel direction
  • Required code or artwork
  • Position tolerance
  • Line speed and data interface
  • Samples that represent date codes
  • A short video of the current process and fault

Relevant solution websites

These specialist sites match the production process discussed above. Final suitability should be confirmed with samples, output, site and acceptance information.

Labelling Machines UKCoding MachineryPrint and Apply

Related questions

Production process relevant to how do i automate applying and verifying date codes?Labels and coding

How do I automate applying and verifying date codes?

Practical guidance for date codes: automate the limiting operation without creating a new bottleneck.

Read the answer →
Production process relevant to how do i change between different date codes formats quickly?Labels and coding

How do I change between different date codes formats quickly?

Practical guidance for date codes: make product and pack changes repeatable, measurable and easier for operators.

Read the answer →
Production process relevant to how should i inspect and verify date codes?Labels and coding

How should I inspect and verify date codes?

Practical guidance for date codes: define what a good pack is and how defects will be detected and handled.

Read the answer →
Production process relevant to how do i check material and surface compatibility for round-bottle labels?Labels and coding

How do I check material and surface compatibility for round-bottle labels?

Practical guidance for round-bottle labels: check materials, seals, adhesives, films, closures and product-contact parts.

Read the answer →
Production process relevant to how do i check material and surface compatibility for front and back labels?Labels and coding

How do I check material and surface compatibility for front and back labels?

Practical guidance for front and back labels: check materials, seals, adhesives, films, closures and product-contact parts.

Read the answer →
Production process relevant to how do i check material and surface compatibility for full wrap labels?Labels and coding

How do I check material and surface compatibility for full wrap labels?

Practical guidance for full wrap labels: check materials, seals, adhesives, films, closures and product-contact parts.

Read the answer →
Common search questions

Questions customers also ask

Open a question for a concise answer, then use the detailed guide above for the full production checks.

What should I check first for date codes?

Obtain current technical data from the product and packaging suppliers

What commonly causes this problem with date codes?

Common causes include seals, hoses, liners, adhesives or films reacting with the product; A change in pack surface and presentation or label, liner, adhesive or ink.; temperature, solvent, oil, moisture or pressure changing material performance.

How can I prove that an adjustment has worked for date codes?

Record a representative baseline, change one variable at a time and repeat the same measurement over enough packs to show that the result is stable rather than a one-off improvement.

When should I consider a different machine or production method for date codes?

Consider a different route when correct setup and maintenance cannot hold the required quality and sustained output across the complete product and pack range.

What information should I send before asking for a solution for date codes?

Include Pack samples; Label reel or print substrate; Label size, gap and reel direction; Required code or artwork.

Which solution website is most relevant to this question?

The clearest starting point on this page is Labelling Machines UK. Final suitability still needs to be confirmed using the actual product, packaging, output and site information.