Powder and piece fillingWhy do fill weights vary when packing tablets and capsules?
Practical guidance for tablets and capsules: find why weights, levels, positions, torque or finished packs vary during a run.
Read the answer →Powder and piece filling
How to package tablets and capsules
Counted or weighed solid doses requiring gentle controlled feeding. Use the questions below to diagnose the symptom, check the process and choose the most suitable machinery route.
18practical answers
3relevant solution routes
7ordered checks per answer
1clear route to ask us
Recommended solution website
View the solutionpowderfillers.co.ukPowder Fillers
See the machinery and application options most closely matched to this production question.
Choose the problem you can see
Questions about tablets and capsules
Start with the symptom rather than guessing the machine. Each answer gives likely causes, checks, brief information and relevant solution websites.
Powder and piece filling
Powder and piece fillingWhy is packing tablets and capsules too slow?
Practical guidance for tablets and capsules: separate true machine speed from waiting, handling, replenishment and short stops.
Read the answer →
Powder and piece fillingWhy does tablets and capsules bridge, block or stop feeding?
Practical guidance for tablets and capsules: trace the first loss of control instead of repeatedly clearing the final jam.
Read the answer →
Powder and piece fillingHow do I reduce dust, giveaway and spillage when packing tablets and capsules?
Practical guidance for tablets and capsules: reduce product loss, damaged packs, film waste and avoidable rejects.
Read the answer →
Powder and piece fillingHow do I clean equipment used for tablets and capsules?
Practical guidance for tablets and capsules: plan access, product removal, safe cleaning and verified return to production.
Read the answer →
Powder and piece fillingHow do I change between pack weights for tablets and capsules?
Practical guidance for tablets and capsules: make product and pack changes repeatable, measurable and easier for operators.
Read the answer →
Powder and piece fillingWhich product-contact materials are suitable for tablets and capsules?
Practical guidance for tablets and capsules: check materials, seals, adhesives, films, closures and product-contact parts.
Read the answer →
Powder and piece fillingWhich filling or weighing machine is best for tablets and capsules?
Practical guidance for tablets and capsules: match the machine principle to the real product, pack, output and acceptance criteria.
Read the answer →
Powder and piece fillingHow do I automate weighing, filling and sealing for tablets and capsules?
Practical guidance for tablets and capsules: automate the limiting operation without creating a new bottleneck.
Read the answer →
Powder and piece fillingHow should I check pack weight and quality for tablets and capsules?
Practical guidance for tablets and capsules: define what a good pack is and how defects will be detected and handled.
Read the answer →
Powder and piece fillingHow do I handle and pack tablets and capsules safely?
Practical guidance for tablets and capsules: control product, machinery, operator and site hazards through competent assessment.
Read the answer →
Powder and piece fillingHow do I prevent repeated dosing faults with tablets and capsules?
Practical guidance for tablets and capsules: turn recurring faults into controlled inspection, service and replacement actions.
Read the answer →
Powder and piece fillingHow do I connect a tablets and capsules filler to pouch or bag machinery?
Practical guidance for tablets and capsules: coordinate product flow, controls, accumulation, guarding and restart behaviour.
Read the answer →
Powder and piece fillingHow do I move from hand weighing to automatic packing of tablets and capsules?
Practical guidance for tablets and capsules: move from manual to semi-automatic and automatic production in sensible stages.
Read the answer →
Powder and piece fillingHow do I prevent segregation, compaction or damage when packing tablets and capsules?
Practical guidance for tablets and capsules: improve appearance, seal, closure, code, dose and transport performance.
Read the answer →
Powder and piece fillingHow should tablets and capsules be fed into the dosing machine?
Practical guidance for tablets and capsules: present products, packs, caps or components consistently to the next operation.
Read the answer →
Powder and piece fillingHow do humidity, static and temperature affect packing tablets and capsules?
Practical guidance for tablets and capsules: understand how the production environment changes product and machine behaviour.
Read the answer →
Powder and piece fillingWhat information is needed to specify equipment for tablets and capsules?
Practical guidance for tablets and capsules: capture samples, dimensions, output, acceptance tests and site constraints before buying.
Read the answer →What normally controls the result?
Reliable dosing depends on flow behaviour, bulk density, aeration, particle size, feeder control and the product drop into the pack.
- Bulk density and aeration
- Hopper geometry and agitation
- Auger, vibratory or weigh-feeder setup
- Drop height and dust containment
- Pack support and product settling
Information that makes a recommendation more accurate
- Representative product sample
- Bulk density range
- Particle or piece size
- Target weight and tolerance
- Pack dimensions and opening
- Dust, hygiene and cleaning requirement
Specialist solution routes
Explore similar topics
See the full powder and piece filling section →Related production guides
Powder and piece fillingFine powders
Small-particle products that can aerate, compact and escape from open transfers.
View questions →
Powder and piece fillingDusty powders
Products that release airborne dust during feeding, dosing and pack transfer.
View questions →
Powder and piece fillingCohesive powders
Non-free-flowing products prone to bridging, rat-holing and inconsistent feed.
View questions →
Powder and piece fillingFree-flowing powders
Products that move readily but can flood, segregate or continue flowing after cut-off.
View questions →
Powder and piece fillingFlour
Light, dusty food powder with variable aeration and bulk density.
View questions →
Powder and piece fillingSpices and seasonings
Aromatic powders or flakes where dust, segregation and cleaning are important.
View questions →Common search questions
Questions customers also ask
Open a question for a concise answer, then use the detailed guide above for the full production checks.
Why do fill weights vary when packing tablets and capsules?
Practical guidance for tablets and capsules: find why weights, levels, positions, torque or finished packs vary during a run.
Why is packing tablets and capsules too slow?
Practical guidance for tablets and capsules: separate true machine speed from waiting, handling, replenishment and short stops.
Why does tablets and capsules bridge, block or stop feeding?
Practical guidance for tablets and capsules: trace the first loss of control instead of repeatedly clearing the final jam.
How do I reduce dust, giveaway and spillage when packing tablets and capsules?
Practical guidance for tablets and capsules: reduce product loss, damaged packs, film waste and avoidable rejects.
How do I clean equipment used for tablets and capsules?
Practical guidance for tablets and capsules: plan access, product removal, safe cleaning and verified return to production.
How should I use the How to package tablets and capsules page?
Practical answers for packaging tablets and capsules, including common faults, ordered checks and relevant Lancing machinery routes.