HTPHow to PackageProduction answers by Lancing UK
Labels and coding

How do I stop wrinkles, lifting or poor print quality with barcodes?

Practical guidance for barcodes: improve appearance, seal, closure, code, dose and transport performance.

Answer format: direct explanation, ordered checks and relevant solution routes. . Application-specific engineering review is still required.

Direct answer

For barcodes, define the finished-pack result and trace each defect back to the first process variable that changed. Reliable identification needs a controlled pack surface, correct label or ink, stable web or print path, accurate triggering and verified finished data. Start by keep labelled samples of acceptable and unacceptable packs and record position tolerance, adhesion, print readability, scan rate and reject accuracy. Make one controlled change at a time so the original cause is not hidden by several new settings.

Production environment relevant to labels and coding
Work safely: Isolate machinery before inspection or clearing. Follow the machine manual, site procedures and competent-person requirements.

What usually causes this?

  • packaging dimensions, surface or material varying between batches
  • A change in pack surface and presentation or label, liner, adhesive or ink.
  • product temperature, viscosity, dust or moisture changing during the run
  • The equipment or handling method not being set for machine-readable linear symbols that require sufficient contrast and quiet zones.
  • incorrect setup being compensated for by excessive force, heat or speed reduction

Checks to make in order

  1. Keep labelled samples of acceptable and unacceptable packs
  2. Record position tolerance, adhesion, print readability, scan rate and reject accuracy using a representative sample.
  3. Record product and packaging batch details
  4. Check sensor and trigger position, web tension or print-head distance and wipe-down, rotation and code verification.
  5. Check the pack immediately after each process stage
  6. Change one variable at a time
  7. Repeat storage, transport or cooling checks where relevant

How to decide the next step

Barcodes involves machine-readable linear symbols that require sufficient contrast and quiet zones. Specify measurable acceptance limits and validate the whole pack, not only the machine cycle.

If adjustment and maintenance cannot hold the required result across the complete product and pack range, compare the machinery route against a written acceptance test. The important comparison is sustained good output—not only maximum cycle speed.

What to include in your production brief

Supplying the information below makes it much easier to distinguish a setup problem from a machinery or packaging limitation:

  • Pack samples
  • Label reel or print substrate
  • Label size, gap and reel direction
  • Required code or artwork
  • Position tolerance
  • Line speed and data interface
  • Samples that represent barcodes
  • A short video of the current process and fault

Relevant solution websites

These specialist sites match the production process discussed above. Final suitability should be confirmed with samples, output, site and acceptance information.

Labelling Machines UKCoding MachineryPrint and Apply

Related questions

Production process relevant to how do moisture, dust and temperature affect barcodes?Labels and coding

How do moisture, dust and temperature affect barcodes?

Practical guidance for barcodes: understand how the production environment changes product and machine behaviour.

Read the answer →
Production process relevant to how do i move from manual to automatic barcodes?Labels and coding

How do I move from manual to automatic barcodes?

Practical guidance for barcodes: move from manual to semi-automatic and automatic production in sensible stages.

Read the answer →
Production process relevant to what information is needed to specify equipment for barcodes?Labels and coding

What information is needed to specify equipment for barcodes?

Practical guidance for barcodes: capture samples, dimensions, output, acceptance tests and site constraints before buying.

Read the answer →
Production process relevant to how do i stop wrinkles, lifting or poor print quality with round-bottle labels?Labels and coding

How do I stop wrinkles, lifting or poor print quality with round-bottle labels?

Practical guidance for round-bottle labels: improve appearance, seal, closure, code, dose and transport performance.

Read the answer →
Production process relevant to how do i stop wrinkles, lifting or poor print quality with front and back labels?Labels and coding

How do I stop wrinkles, lifting or poor print quality with front and back labels?

Practical guidance for front and back labels: improve appearance, seal, closure, code, dose and transport performance.

Read the answer →
Production process relevant to how do i stop wrinkles, lifting or poor print quality with full wrap labels?Labels and coding

How do I stop wrinkles, lifting or poor print quality with full wrap labels?

Practical guidance for full wrap labels: improve appearance, seal, closure, code, dose and transport performance.

Read the answer →
Common search questions

Questions customers also ask

Open a question for a concise answer, then use the detailed guide above for the full production checks.

What should I check first for barcodes?

Keep labelled samples of acceptable and unacceptable packs

What commonly causes this problem with barcodes?

Common causes include packaging dimensions, surface or material varying between batches; A change in pack surface and presentation or label, liner, adhesive or ink.; product temperature, viscosity, dust or moisture changing during the run.

How can I prove that an adjustment has worked for barcodes?

Record a representative baseline, change one variable at a time and repeat the same measurement over enough packs to show that the result is stable rather than a one-off improvement.

When should I consider a different machine or production method for barcodes?

Consider a different route when correct setup and maintenance cannot hold the required quality and sustained output across the complete product and pack range.

What information should I send before asking for a solution for barcodes?

Include Pack samples; Label reel or print substrate; Label size, gap and reel direction; Required code or artwork.

Which solution website is most relevant to this question?

The clearest starting point on this page is Labelling Machines UK. Final suitability still needs to be confirmed using the actual product, packaging, output and site information.