HTPHow to PackageProduction answers by Lancing UK
Liquid filling

Which filling machine is best for spirits?

Practical guidance for spirits: match the machine principle to the real product, pack, output and acceptance criteria.

Answer format: direct explanation, ordered checks and relevant solution routes. . Application-specific engineering review is still required.

Direct answer

For spirits, write the production result before naming a machine before changing several settings at once. This is a filling application where viscosity, aeration, temperature, supply conditions, nozzle control and product-contact compatibility affect dose and pack quality for spirits. Vapour, static, flammability and hazardous-area requirements may need competent assessment.. Use representative product and packaging, keep the order of results and identify the first point where the process moves outside the agreed limit. Then make one controlled change, repeat the same test and compare sustained good output rather than a single successful pack.

Production environment relevant to spirits
Work safely: Isolate machinery before inspection or clearing. Follow the machine manual, site procedures and competent-person requirements.

What usually causes this?

  • equipment is compared by headline speed rather than sustained good output
  • the hardest product or pack is not included in trials
  • cleaning, changeover and operator handling are excluded from the comparison
  • the acceptance test is not agreed before purchase
  • the equipment or method is not configured for a filling application where viscosity, aeration, temperature, supply conditions, nozzle control and product-contact compatibility affect dose and pack quality for spirits. Vapour, static, flammability and hazardous-area requirements may need competent assessment.

Checks to make in order

  1. Write the production result before naming a machine
  2. Define minimum and maximum products and packs
  3. Set sustained output and quality tolerances
  4. Include cleaning, changeover and operator work
  5. Trial the hardest real samples
  6. Compare support, spares, guarding and utilities
  7. Agree a factory and site acceptance test

How to decide the next step

Spirits is a filling application where viscosity, aeration, temperature, supply conditions, nozzle control and product-contact compatibility affect dose and pack quality for spirits. Vapour, static, flammability and hazardous-area requirements may need competent assessment.. Use the measurements to decide whether the next action is a material or packaging change, a setting correction, a maintenance task, improved feeding or a different machinery principle.

If the process cannot achieve the required choosing machinery result across the full product and pack range, compare the best-matched route against a written acceptance test. Include cleaning, changeover, operator work, rejects and recovery from normal stops.

What to include in your production brief

Supplying the information below makes it easier to distinguish a setup problem from a product, packaging, feeding, maintenance or machinery limitation:

  • Product name, formulation and safety data
  • Viscosity at the filling temperature
  • Minimum and maximum fill quantity
  • Required tolerance and measurement method
  • Container dimensions and neck opening
  • Required good packs per hour
  • Samples that represent spirits
  • A short video of the present process and fault

Relevant solution websites

The first route is the primary match for this question. Final suitability must be confirmed with samples, output, site and acceptance information.

ATEX Filling MachinesChemical FillersLiquid Fillers

Related questions

Production process relevant to how do i automate filling, capping and labelling for spirits?Liquid filling

How do I automate filling, capping and labelling for spirits?

Practical guidance for spirits: automate the limiting operation without creating a new bottleneck.

Read the answer →
Production process relevant to how do i fill spirits safely?Liquid filling

How do I fill spirits safely?

Practical guidance for spirits: control product, machinery, operator and site hazards through competent assessment.

Read the answer →
Production process relevant to how do i connect a spirits filler to the rest of the line?Liquid filling

How do I connect a spirits filler to the rest of the line?

Practical guidance for spirits: coordinate product flow, controls, accumulation, guarding and restart behaviour.

Read the answer →
Production process relevant to which filling machine is best for still water?Liquid filling

Which filling machine is best for still water?

Practical guidance for still water: match the machine principle to the real product, pack, output and acceptance criteria.

Read the answer →
Production process relevant to which filling machine is best for syrups?Liquid filling

Which filling machine is best for syrups?

Practical guidance for syrups: match the machine principle to the real product, pack, output and acceptance criteria.

Read the answer →
Production process relevant to which filling machine is best for thin free-flowing liquids?Liquid filling

Which filling machine is best for thin free-flowing liquids?

Practical guidance for thin free-flowing liquids: match the machine principle to the real product, pack, output and acceptance criteria.

Read the answer →
Common search questions

Questions customers also ask

Open a question for a concise answer, then use the detailed guide above for the full production checks.

What should I check first for spirits?

Write the production result before naming a machine.

What commonly causes choosing machinery with spirits?

Common causes include equipment is compared by headline speed rather than sustained good output; the hardest product or pack is not included in trials; cleaning, changeover and operator handling are excluded from the comparison.

How can I prove that an adjustment has worked for spirits?

Record a representative baseline, change one variable, repeat the same measurement and compare enough good packs to show a stable improvement rather than a one-off result.

When should I consider different equipment for spirits?

Consider a different route when correct setup, suitable materials and planned maintenance cannot hold the required quality and sustained output across the complete range.

What information should I send before asking for a solution for spirits?

Include representative samples, dimensions, product behaviour, current method, required good output, acceptance tolerances, utilities and a video of the fault.

Which solution website is most relevant to this question?

The best-matched starting point is ATEX Filling Machines at atexfillingmachines.co.uk. The actual product, pack, output and site must still be reviewed.